Eva puts the MWG BLOCKER™ FR Hoodie through its paces — on site, in the cold, with a hard hat on.
We're going to let Eva speak first, because she said it best:
"There is no other work hoodie that does this one thing. This is my favourite piece of clothing from MWG."— Eva, Instagram Trades Influencer
That "one thing"? The hood actually fits over a hard hat. We'll get there. But first — she had a lot more to say, and all of it is worth a read if you spend long days outside and you're done putting up with gear that doesn't pull its weight.
Comfort You'll Actually Notice
Eva called the MWG BLOCKER™ one of the comfiest hoodies she's ever put on — full stop, not just in the work category. That's a big claim. It comes down to the fit and the fabric. The heavyweight dual-hazard fleece feels substantial without being stiff. You can move your arms. You can actually work in it.
"High-vis or not high-vis, this hoodie fits so much better than most other hoodies, especially work hoodies." If you've wrestled with a stiff, boxy sweatshirt that makes every reach feel like a battle, you know exactly what she means.
Warm. And It Stays Dry.
The BLOCKER™ is built for Canadian winters. Heavyweight fleece that holds heat — but it doesn't just leave you in a soggy mess the second it rains or sleets. Eva put it simply: "It feels like it's not getting soaked the second water hits it." That's the kind of detail that matters at 7am when the weather turns and you're still three hours from lunch.
The Details That Make a Real Difference
Pockets That Hold
Lean over, bend down — your screws and screwdrivers stay put. The kangaroo pocket doesn't dump your stuff every time you move.
Waistband That Stays Up
Ribbed FR waistband that holds its position all day. No more tugging it back down. Eva specifically called this one out.
Hood Over Hard Hat
Eva's favourite feature — the hood is cut to sit right over a hard hat when the wind picks up, keeping your neck warm without fighting your PPE.
Inherently FR
The cuffs, waistband, and hood are inherently flame-resistant — protection built into the fabric that doesn't wash out, ever.
"Sometimes you just wanna throw that up and it will actually sit over that hard hat and stay there and keep your neck warm. I love this hoodie."— Eva
That hood detail is genuinely rare. Most days you'll wear it underneath your hard hat — but on those days when the wind picks up and you need one more layer of warmth around your neck, it's there. And it stays put.
The Safety Side — Built In, Not Bolted On
The MWG BLOCKER™ FR Hoodie isn't just comfortable gear that happens to be flame-resistant. It's arc-rated to ATPV 25 / CAT 3, certified to NFPA 2112 and ASTM 1506, and CSA Z96 compliant. The FR protection is inherent to the fabric — it doesn't degrade with washing. Every stress point is reinforced for long-term durability. The 2" silver segmented reflective striping keeps you visible on low-light sites.
For anyone working around arc flash or flash fire hazards, wearing FR gear you actually want to put on is a big deal. Compliance shouldn't feel like a punishment.
Technical Specs
- ASTM 1506 / NFPA 2112 / CSA Z96
- ATPV 25 / CAT 3
- Heavyweight dual-hazard fleece
- Inherently flame-resistant
- 2" silver segmented reflective striping
- Front kangaroo pocket
- Ribbed cuffs & waistband (inherent FR)
- All stress points reinforced for durability
- Available in high-vis and standard
- Designed for Canadian winters
Bottom Line
Eva's review hits on everything we hear from people who've made the switch to the BLOCKER™ — the fit, the warmth, the pockets, the waistband, and yes, that hood. It's flame-resistant workwear that doesn't feel like a compromise. It feels like something you actually want to throw on every single day.
If you're in the market for an inherently FR hoodie that can handle a Canadian winter and a full day on site — the MWG BLOCKER™ is worth a serious look.
Shop the MWG BLOCKER™ FR Hoodie
Built for long days. Certified for the hazards. Comfy enough to be your favourite.
Shop Now →