Can You Wear a Regular Jacket Over FR?

If your job calls for FR clothing, your winter jacket needs to be FR too. Whatever you wear on the outside is the first layer to meet the heat in an arc flash or flash fire. A regular parka made with nylon, polyester, or synthetic insulation can ignite and keep burning after the event is over, and the FR clothing underneath can't stop a fire that's burning on top of it.

MWG STORMSHIELD Men's FR Parka Jacket in orange with silver reflective tape, a flame resistant winter jacket

The STORMSHIELD™ Men's FR Parka Jacket, an FR shell with a zip-in liner for cold days.

It's one of the most common winter questions we hear from crews, and it makes sense. You've invested in good FR shirts and pants, and the warm coat in your truck looks like it should be fine over top. Here's why that outer layer matters so much, and how to stay warm without giving up protection.

Why does the outer layer matter so much?

FR clothing works by resisting ignition and self-extinguishing once the heat source is gone. That only helps you if the FR fabric is what the flame actually touches. When a non-FR jacket is on the outside, it becomes the fuel. Many synthetic fabrics can also melt, and melted fabric holds heat against you far longer than the flash itself.

The arc flash safety standards used in Canada and the U.S. are clear on this. Any layer worn over your arc rated clothing, whether it's a vest, rain gear, or a winter coat, needs to be arc rated too. Your FR system is only as strong as the layer on the outside.

What about hoodies, vests, and rain gear?

The same rule applies to anything you throw over your FR during the day. A cotton hoodie over an FR shirt, a standard hi-vis vest, or a rain shell from the hardware store all put a non-FR layer on the outside.

The good news is that each of these has an FR version built for the job. Our FR hoodies give you that familiar warm layer for cold mornings. If you need to be seen, our post on FR hi-vis vs regular hi-vis covers the difference. And for wet days, FR rainwear keeps the outer layer protected through sleet and rain.

Is it okay to wear non-FR clothing under your FR?

Under is a different story from over. Non-melting natural fibres like cotton or wool are generally acceptable beneath your FR, as long as your outer layer is worn properly, with shirts tucked in and cuffs and collars closed. They just won't add to your arc rating. An FR base layer is the better pick because it becomes part of your protection and helps manage sweat. We cover this in more detail in Can You Wear Non-FR Clothing Under FR Gear?

How do you stay warm without giving up protection?

The easiest answer is an FR jacket that can change with the weather. The MWG STORMSHIELD™ Men's FR Parka Jacket pairs a waterproof, windproof shell cut from inherently FR ripstop with a liner that zips in on the coldest days. You choose your liner, either the quilted FR Cooler Jacket or a BLOCKER™ FR fleece hoodie. Zip the liner out for fall and spring, and you've got one shell that works from first frost through the deep freeze. It's CAT 2 rated, with a detachable hood and silver reflective tape for low-light shifts.

If you like a shorter cut that stays out of the way when you bend and climb, the STORMSHIELD™ Men's FR Bomber Jacket uses the same zip-in liner system. For women, our women's FR jackets are designed with a true women's fit.

Not sure how your jacket, hoodie, and base layer work together? Our layering guide walks through the combinations, and you can browse every option in our FR outerwear collection.

 

Back to blog